GAS CarboAir 60 Pre Filter
In stock, Pickup available at London Grow HQ
Usually ready in 24 hours
GAS CarboAir 60 Pre Filter
150mm x 660mm (1350m3/hr)
London Grow HQ
R/O 121 Theobalds Park Road
Enfield EN2 9BH
United Kingdom
Overview
The CarboAir Pre Filter protects the Carbon Filter from dirt, dust, or foreign particles. It prevents the filter from being blocked with different particles and extends its life. You must change the pre-filter when it's dirty. The unit is super-efficient at removing and blocking dust particles. It's thicker than other pre-filters but not as dense. That's why it has lower airflow restrictions compared to competitors. The lifespan of the pre-filter depends on the conditions in your grow room. Depending on the volume of dust particles in the grow room, it can last up to several months before you must replace it.
General Information
- The pre-filter allows for better airflow in the extraction system;
- Improved airflow means increased control over the humidity and temperature levels;
- The pre-filter is suitable for use with GAS CarboAir filters.
Benefits
- It's easy to use and wash;
- Ensures optimum performance of the extraction system;
- Made at the highest GAS standards.
The Science
The pre-filters fit onto the GAS carbon filter. The air flows through the fabric, through the filter, and out through the ducting of your extraction system. The pre-filter removes dust, dirt, and foreign particles before they can block the carbon filter. Dust can reduce the airflow rate through the extraction system, which will increase the temperature and humidity levels in the grow room.
How to Use
It's easy to use the pre-filter. Slide the pre-filter onto the CarboAir carbon-filter. Use it with pre-filter bands. The bands form a seal and ensure that the air is drawn through the pre-filter's fabric.